PE, PVC, UPVC HDPE braçadeiras de reparo de junta dobrada de tubo

Informação básica.

Modelo NÃO.	DN63
Pacote de Transporte	Caixa de papelão
Especificação	DN63
Marca comercial	GRANDE MURALHA
Origem	China
Código HS	7307290000

Descrição do produto

Grampos de reparo UPVC

1. Resumos:
* Terno para reparo de tubos com vazamento de emergência sob pressão
* Pressão de trabalho: PN10/PN16
2. Recursos:
* Terno para tubo PE, PVC, UPVC, HDPE
* Terno para tubo reto, junta de fusão de topo, junta de fusão de soquete, junta de dobra, junta em T
* correção rápida de vazamento no pipeline
*fácil instalação e desmontagem
3. A lista de tamanhos

S/N	Descrição		Tamanho		Pressão
			milímetros	polegada	MPa
1	Grampos de reparo UPVC	Correção direta	DN50	2''	1,0
2	Grampos de reparo UPVC	Correção direta	DN63	2,5''	1,0
3	Grampos de reparo UPVC	Correção direta	DN75	3''	1,0
4	Grampos de reparo UPVC	Correção direta	DN90	3,5''	1,0
5	Grampos de reparo UPVC	Correção direta	DN110	4,5''	1,0
6	Grampos de reparo UPVC	Correção direta	DN125	5''	1,0
7	Grampos de reparo UPVC	Correção direta	DN140	5,5''	1,0
8	Grampos de reparo UPVC	Correção direta	DN160	6,5''	1,0
9	Grampos de reparo UPVC	Correção direta	DN180	7''	1,0
10	Grampos de reparo UPVC	Correção direta	DN200	8''	1,0
11	Grampos de reparo UPVC	Correção direta	DN225	9''	1,0
12	Grampos de reparo UPVC	Correção direta	DN250	10''	1,0
13	Grampos de reparo UPVC	Correção direta	DN280	11''	1,0
14	Grampos de reparo UPVC	Correção direta	DN315	12,5''	1,0
15	Grampos de reparo UPVC	Correção direta	DN355	14''	1,0
16	Grampos de reparo UPVC	Correção direta	DN400	16''	1,0
17	Grampos de reparo UPVC	Correção direta	DN500	20''	1,0
1	Grampos de reparo UPVC	Correção de camiseta

a. UPVC repair clamps is only suit for Butt Fusion Joint and Socket Fusion Joint of Plastic Pipe but it's not suit for Electro Fusion Joint of Plastic Pipe. b. The size and pressure rating of UPVC repair clamps should be match up with the size and pressure rating of leaking pipeline. The pressure rating of UPVC repair clamps is 1.0 Mpa ( 10 bar ) and it is prohibited to use UPVC repair clamps if the operation pressure of your pipeline is above 1.0 Mpa (10 bar ) c. You should check the surface of UPVC repair clamps if there is any crack or damage before installation and the UPVC repair clamps with crack or damage is prohibited to use . d. The pressure of pipeline should be reduced before installation of UPVC repair clamps . e. The oxidizing material and mud on the surface of pipeline should be cleaned before installation and then check the breakage of pipeline and the broken pipeline should be cut off and replaced if it's long and you are not recommended to use UPVC repair clamps for the leaking pipeline with the oversize breakage. f. Put the lubricant ( such as soap water, detergent and etc) on the pipeline surface and rubber gasket of repair clamps for the role of lubrication which is needed for position adjustment of repair clamps during installation process . g. uninstall the vent hole plug of repair clamps and then fix the leaking position with two half bodies of repair clamps and fasten with bolts and nuts in diagonal direction . h. wrap the plug with tape and fix into vent hole of repair clamps i. You should not start the pump until air inside the pipeline exhausted by the exhaust device of pipeline and then restore pipeline pressure when air exhausted .